SOLVESPACE -- parametric 2d/3d CAD

(you are viewing a thread; or go back to list of threads)

Keep getting "problematic edges" (by Chris)
Hi all,

I'm a beginner but I'm already in love with SolveSpace's minimal but powerful user interface.

Here's a part I'm working on and I'm getting problematic edges. I could somewhat reduce the number by forcing NURBS-to-triangles on g003, but it's still not clean.

I have a hunch this has to do with the extrusions happening at a weird angle and some of them (the *filler ones) being quite long, but it also may be a fundamental geometric issue in my design.

Any feedback would be appreciated.
Fri May 22 2020, 02:58:41, download attachment profile6.slvs
(no subject) (by Andrew)
The problem you are having is caused by having unions that touch along a single line, due to limited precision in computer maths. Touching faces do not have this problem, If the models as drawn will not serve your purposes, restructure the way you draw the model to avoid contact along a single line. One possible solution is to create a small ,0.1 or smaller spacing between the edge of the solid, and corresponding edge of the sketch, and fill it in where you are currently using triangles.

Alternatively, draw you sketches on the other face of the solid, so that when they extruded, they overlap the solid that the union is joining them to. An overlap of solids is allowed when creating a single solid using unions. This approach has the advantage that fillers are not required.
Fri May 22 2020, 18:19:35
Post a reply to this comment:
Your Name:
Your Email:
(no HTML tags; use plain text, and hit Enter for a line break)
Attached file (if you want, 5 MB max):
© 2008-2018 SolveSpace contributors. Most recent update Nov 22 2018.